Panerai Sailcloth Strap with Deployant Clasp

This strap fits any Panerai with a 22mm or 24mm lug width. Luminor, Luminor Marina, Submersible, Radiomir, and Luminor Due. Select your size above and it works.

Woven sailcloth with a brushed stainless steel deployant clasp. Sailcloth was originally developed for marine use. Tightly woven synthetic fibres that resist water, UV, salt, and abrasion while staying light on the wrist. On a Panerai, that naval connection runs deeper than aesthetics. The brand was founded supplying instruments to the Italian Navy. The Luminor and Radiomir were designed for combat swimmers. Sailcloth is the material that connects the watch's military diving heritage to a strap you can actually wear every day without the moisture problems that come with traditional fabric or factory leather.

The difference between sailcloth and the stock leather Panerai ships on most models is immediate. Leather absorbs sweat, takes time to dry, develops odour with extended wear, and weakens at the buckle point. Sailcloth handles water without absorbing it, dries in minutes rather than hours, and keeps its structure through daily use. On a 44mm Luminor that weighs over 100g, the lighter, more breathable feel of sailcloth over leather is noticeable within the first hour. If you have been rotating leather straps through the seasons and losing one every summer to sweat damage, this is the strap that stops that cycle.

The deployant clasp is the upgrade over a standard pin buckle or the OEM tang buckle that ships on most Panerai leather straps. It folds shut in one motion, distributes pressure evenly across the wrist, and protects the strap from the repeated stress that causes premature wear at the buckle point. Once sized, the watch goes on and comes off with a single click. No threading. No fumbling. Panerai owners who have used the OEM deployant on the factory rubber will find the same experience here.

Seven colourways. Black is the default and the safest pairing across every collection. Brown suits the sandwich dial Luminor with warm lume and connects to Panerai's Italian leather heritage. Navy complements the blue dial Submersible and the blue Luminor Due without matching exactly. Grey works on the slate and titanium models. Khaki adds a military character that suits the Luminor's frogman roots. Orange and red are for the Submersible owner who wants the strap to match the dive bezel accent.

Complementary clasp engraving available. Up to three characters, laser engraved into the stainless steel for a permanent, precise finish.

Key Features:

• Tightly woven sailcloth construction
• Water-resistant, breathable, and UV-stable
• Brushed stainless steel deployant clasp, pre-fitted
• Structured enough to hold shape, soft enough for all-day wear
• Available in 22mm and 24mm lug widths
• 7 colourways: Black, Grey, Khaki, Navy, Orange, Red, Cream
• Complementary clasp engraving up to 3 characters

Fitting your Panerai:

Panerai uses different strap attachment systems depending on the model and generation. Check which system your watch uses before fitting.

Current production models (PAM01312, PAM01539, and most references from 2018 onward): These accept standard spring bars. Fit this strap using the spring bars included. A standard spring bar tool is all you need.

Older Luminor models with the screw bar and tube system (PAM00111, PAM00112, PAM01000, PAM00773 and similar): These use threaded screw bars and metal tubes. Fit this strap using your existing Panerai screw bars and the screwdriver that came with your watch. Remove the tubes from your old strap and thread them into this one. Alternatively, aftermarket spring bar replacements for Panerai are widely available and eliminate the need for screws entirely.

Luminor 1950 models with the quick-release push-button system: Use the two-pin Panerai tool that came in your box to release the existing strap. Then fit this strap using the included spring bars or your existing Panerai bars.

If you are unsure which system your Panerai uses, check the back of the lugs. A visible push-button means the quick-release system. Visible screw heads mean the screw bar system. Neither visible means standard spring bars.

Panerai Compatibility Guide:

This strap fits any Panerai with a 22mm or 24mm lug width. Select your size above.

24mm fits (the core Panerai range):

Luminor 44mm (PAM01312, PAM01316) Luminor Marina 44mm (PAM01314, PAM01104, PAM01005) Luminor Base Logo 44mm (PAM01000, PAM00773) Submersible 42mm (PAM00959, PAM00683) Submersible 44mm (PAM01209, PAM00684) Radiomir 45mm (PAM00572, PAM01346) Radiomir 1940 45mm

22mm fits:

Luminor Due 42mm (PAM01539, PAM01541, PAM01542) Radiomir 1940 42mm (PAM00512) Luminor Marina 42mm (PAM01392)

This strap does NOT fit the following Panerai models:

• Luminor Due 38mm and Radiomir Quaranta 40mm use 20mm
• Submersible 47mm and Radiomir 47mm wire lug use 26mm

For 20mm models, see our universal sailcloth strap. We do not currently stock 26mm straps.

If your PAM reference is not listed, check your receipt or box for the reference number, or measure between the inner edges of both lugs. Use our on-page strap checker to confirm before ordering.

What's included:

• 1x Woven sailcloth strap
• 1x Stainless steel deployant clasp (pre-fitted)
• Spring bars (compatible with current production Panerai models accepting standard spring bars)
• Screwdriver and screw bars not included (use your existing Panerai hardware for older screw-bar models)
• Watch not included

All Panerai Straps → | Morellato Calfskin Leather → | Embossed Alligator Leather → | Deployant Straps Guide →